Industrial, automotive, and infrastructure supply
Comprehensive engineering products for specification-driven buyers.
MATRIXX GLOBAL supports international sourcing across machinery, automotive parts, earthmoving equipment, electrical systems, fluid-control products, and power-related engineering categories.
CNC and precision components
Compressors and air systems
Valves, pumps, motors, and lifts
Engineering Gallery
High-demand engineering segments with strong commercial relevance.
Accumilators and Battery Cells
Lead-acid battery systems covering automotive, industrial, and secondary accumulator applications.
Lead-acid battery technical specifications covering battery types, voltage, capacity, applications, and secondary accumulator details.more
| Parameter | Details |
|---|---|
| Category Includes | Automotive and industrial lead-acid batteries, sealed VRLA and flooded types, plus secondary accumulators such as NiCd and NiMH |
| Lead-Acid Battery Type | Rechargeable lead-acid accumulator |
| Nominal Voltage | 2 V per cell, typically 12 V packs with 6 cells in series |
| Capacity Range | About 20 Ah to several hundred Ah |
| Terminals | SAE, DIN, and other standard post options |
| Applications | Automotive starter batteries, UPS systems, telecom backup, renewable integration |
| NiCd Specifications | About 1.2 V per cell, capacity from about 200 mAh to several Ah, high cycle life above 500 cycles, IEC 61951-1 |
| Other Secondary Types | NiMH at 1.2 V per cell with IEC 61951-2, sealed lead-acid 12 V packs with IEC 60896-21/22 |
Brake Linings
Automotive braking components for heavy-duty and commercial vehicle applications.
Brake linings technical specifications covering material, performance, quality, export parameters, and common features.more
| Parameter | Details |
|---|---|
| Material | Non-asbestos organic, semi-metallic, or ceramic composites |
| Composition | Aramid fibre, mineral fibres, friction modifiers, phenolic resin binder |
| Thickness & Density | 5 mm - 25 mm thickness, density 1.8 - 2.4 g/cm³ |
| Hardness | 60 - 90 Shore D |
| Performance | Coefficient of friction 0.30 - 0.45, temperature resistance up to 300°C - 400°C, low wear, shear strength ≥ 3.5 MPa, high fade resistance |
| Physical Properties | Compressive strength ≥ 100 MPa, moderate thermal conductivity, riveted or bonded options, precision-ground surface finish |
| Quality & Compliance | ISO, SAE, ECE R90, asbestos-free, dynamometer tested, stable shelf life in dry storage |
| Packaging & Export | Corrugated export cartons, part-number and batch labeling, COA, test reports, and TDS documentation |
| Common Features | Consistent braking, low noise and vibration, suitable for automotive and industrial use |
Earthmoving Machines
Excavators, loaders, bulldozers, graders, and attachments for construction and heavy-duty earthmoving operations.
Earthmoving machine specifications covering excavators, loaders, bulldozers, graders, and related attachment parameters.more
| Machine Type | Details |
|---|---|
| Excavator | Hydraulic crawler excavator, operating weight about 8,000 - 25,000+ kg, engine power about 70 - 200+ HP, bucket capacity about 0.5 - 1.5 m³, digging depth about 3,000 - 6,000+ mm, steel tracks, 360° slewing structure, load-sensing hydraulics, hydraulic final drives, bucket, breaker, and grapple options |
| Backhoe Loader | 4WD or 2WD machine, operating weight about 7,000 - 11,000 kg, engine power about 70 - 110 HP, loader bucket about 1.0 - 1.5 m³, backhoe bucket about 0.2 - 0.5 m³, digging depth about 4,000 - 5,000 mm, hydraulic flow about 100 - 150 L/min, synchromesh or power shuttle transmission, oil-immersed multiple-disc brakes |
| Wheel Loader | Operating weight about 6,000 - 15,000 kg, engine power about 100 - 220 HP, bucket capacity about 1.5 - 4.0 m³, breakout force about 80 - 140 kN, tire sizes about 17.5-25 to 20.5-25, powershift or torque-converter transmission, articulated steering |
| Bulldozer / Grader / Leveller | Crawler bulldozer format, operating weight about 10,000 - 30,000 kg, engine power about 120 - 300+ HP, blade width about 3.0 - 4.5 m, low-ground-pressure tracks, electro-hydraulic blade control, torque-converter or planetary transmission |
| Other Equipment | Scrapers or levellers with 2.5 - 4.0 m blade width and 8 - 15 m³ bowls, high-tensile steel buckets and grapples with CAD-based machining |
Electric Motors
AC and DC electric motor ranges for industrial drives, pumps, compressors, and general equipment applications.
Electric motor specifications covering small motors, 3-phase motors, high-power motors, and electrical/mechanical characteristics.more
| Motor Segment | Details |
|---|---|
| Small Motors | Power output up to 37.5 W, 12 - 240 V depending on AC or DC type, self-ventilated, permanent magnet DC or shaded-pole or induction AC construction |
| 3-Phase AC Motors | Squirrel-cage or slip-ring induction motors for pumps, compressors, conveyors, and industrial drives, power about 0.75 - 75 kW, 380 or 415 V at 50 Hz, TEFC or ODP enclosure, IEC frame sizes 80 - 280, IE2 or IE3 efficiency |
| High-Power Motors | Above 75 kW up to hundreds of kW, 400 - 690 V, IC411 or IC81W cooling, industrial cast frames and custom winding for heavy-duty drives |
| Other AC / DC Variants | Single-phase AC motors, AC motors up to 750 W, DC motors and generators |
| Electrical Characteristics | Small motors at 12 - 240 V DC or mains AC, industrial three-phase at 380 - 415 V AC, frequency 50/60 Hz, insulation class F or H |
| Mechanical Characteristics | IEC frame series, TEFC and ODP enclosures, S1 continuous-duty cycle |
Fastners
Industrial fasteners for construction, automotive, and engineering applications.
We export a comprehensive range of industrial fasteners including bolts, nuts, screws, washers, studs, anchors, rivets, and threaded rods, available in standard and custo...more
| Parameter | Details |
|---|---|
| Product Range | Bolts, nuts, screws, washers, studs, anchors, rivets, threaded rods in standard and customized specifications |
| Standards | ISO, ASTM, DIN, BS |
| Material Grades | Carbon steel, alloy steel, stainless steel, grades 4.6, 8.8, 10.9, 12.9, A2-70, A4-80 |
| Thread & Size Range | Metric and UNC or UNF, coarse and fine threads, sizes from M3 to M100 and above |
| Performance | Precise tolerances, high tensile strength, strong load-bearing capacity, reliable under stress and temperature variation |
| Surface Finish | Zinc plated, hot-dip galvanized, black oxide, PTFE-coated |
| Applications | Construction, automotive, and industrial engineering applications |
Generators & Rotary Converters
Diesel gensets, portable generators, rotary converters, and alternator components for power generation and conversion systems.
Generator and rotary converter specifications covering diesel gensets, portable sets, alternators, and electrical conversion systems.more
| Product Group | Details |
|---|---|
| Diesel Generator Sets | Prime and standby sets with diesel or semi-diesel engines and synchronous alternators, rated outputs grouped at up to 75 kVA, 75 - 375 kVA, and above 375 kVA, typical outputs 230/400 V three-phase or 230 V single-phase, 50 or 60 Hz, radiator and forced cooling, auto or manual control panels |
| Portable / Spark-Ignition Sets | Up to about 3.5 kVA, petrol or gas engines, about 230 V AC, single-phase, air-cooled, used for residential, light commercial, and tool power |
| Electric Rotary Converters | Power conversion between types or frequencies, variable voltage and power by application, common in railway traction and industrial drive systems |
| Alternators & Components | Synchronous alternators with brushless or brush-type excitation, outputs from small kVA to hundreds of kVA, voltage classes 230/400 V and above, 50/60 Hz, components include windings, bearings, rotors, and stators |
Precision Parts
Precision-machined spare parts, inserts, mounts, housings, and engineered components for industrial equipment.
Precision parts specifications covering machined spare parts, propeller components, covers, mounts, inserts, and housing parts.more
| Part Type | Details |
|---|---|
| Machining Spare Parts | Carbon steel EN8/EN24, SS304/SS316, and aluminium alloys, CNC turning, milling, and grinding, tolerance about ±0.005 mm to ±0.02 mm, surface finish Ra ≤ 0.8 µm, heat treatment as required, ISO 2768 and ASME or ISO tolerancing references |
| Propeller Components | Cast and CNC-machined stainless steel or aluminium, static and dynamic balance, surface finish Ra ≤ 1.6 µm, CNC-controlled blade geometry, dimensional tolerance about ±0.01 mm to ±0.05 mm |
| Upper Cover Parts | Aluminium alloys or machined cast iron, flatness and parallelism ≤ 0.02 mm on seating surfaces, anodized or painted coating options, tolerance about ±0.01 mm to ±0.03 mm |
| Aluminium Mounts | Alloy 6061 or 7075, CNC milled, tolerance about ±0.005 mm to ±0.03 mm, surface finish Ra ≤ 1.6 µm, anodizing as required |
| Steel Inserts | Tool steel or stainless steel, hardness about 45 - 55 HRC, tolerance about ±0.005 mm to ±0.02 mm, black oxide or nitriding treatment |
| Housing Parts | Cast iron FC-20/25, aluminium, or alloy steel, multiple machining operations on bores, threads, and slots, tolerance about ±0.01 mm to ±0.05 mm on critical surfaces, Ra ≤ 1.6 µm on functional faces |
Industrial Valves
Ball, butterfly, and check valves with industrial trim, sealing, and actuator options for demanding pipeline and process applications.
Industrial valve specifications covering ball, butterfly, and check valves, valve seats, stems, seals, actuators, and internal parts.more
| Valve Group | Details |
|---|---|
| Ball Valves | Floating, trunnion-mounted, one-piece, two-piece, three-piece, and fire-safe designs; API 6D, ISO 17292, ASME B16.34; carbon steel WCB, stainless steel CF8/CF8M, alloy steel; pressure classes PN 10 - PN 420 or ASME 150 - 2500; sizes about DN 15 to DN 900; flanged, butt-weld, socket-weld, and threaded ends; tested to API 598 or ISO 5208 |
| Butterfly Valves | Wafer, lug, and double-flanged types with concentric, double-offset, or triple-offset designs; API 609, ASME B16.34, EN 593, ISO 5752, AWWA C504; cast iron, ductile iron, carbon steel, stainless steel, bronze; pressure classes about PN 6 - PN 100 or ASME 150 - 600; sizes about DN 50 to DN 1200+; resilient seats EPDM, NBR, PTFE or metal-seated options; manual, gear, electric, or pneumatic actuation |
| Check Valves | Swing, lift, dual-plate, and wafer-style non-return valves; API 594, BS 1868, BS 5352, ASME B16.34; cast iron, ductile iron, carbon steel, stainless steel, bronze; common sizes DN 50 - DN 600+ with wafer, lug, and flanged ends |
| Seats, Stems & Seals | Seat materials include SS304, SS316, WCB, and stellite overlays with surface finish Ra ≤ 0.8 µm and hardness above HRC45; stems in SS410, SS431, A182 F6a/F22; PTFE, graphite, elastomer, or metal C-ring seals with leakage criteria such as API 641 |
| Actuators & Internals | Pneumatic, electric, and hydraulic actuator options with ISO 5211 and ISO 5115 style mounting references, plus discs, balls, plugs, trim, packing, glands, bonnets, and springs designed to API 6D or ASME B16.34 requirements |
Mechanical Power Transmission Components
Bearings, gears, gearboxes, clutches, and couplings engineered for industrial motion control and heavy-duty power transfer.
Mechanical transmission specifications covering bearings, gearing, gearboxes, clutches, shaft couplings, and gear couplings.more
| Component Group | Details |
|---|---|
| Bearings | Deep groove, angular contact, cylindrical roller, tapered roller, thrust, and specialized bearings, ISO 15, ISO 281, ISO 492, bore ranges from about 10 mm to 2000+ mm, bearing steel SAE 52100 or 100Cr6 with stainless variants, ABEC or P0/P6/P5 grades, sealed or shielded options |
| Gears & Gearboxes | Spur, helical, bevel, hypoid, internal and planetary gear sets, helical, bevel-helical, planetary, and worm gearboxes, AGMA and ISO design basis, power from about 0.5 kW to above 500 kW, ratios from about 1.5:1 to 100:1+, cast iron or steel housings |
| Clutches & Shaft Couplings | Rigid couplings, flexible couplings, universal joints, clutch assemblies, torque-limiting couplings, torque ratings from tens to thousands of N-m, shaft sizes about 10 mm to 200 mm, mild steel, alloy steel, cast iron, ductile iron, and elastomer insert options |
| Gear Couplings | Full gear, half-gear, grid, and torsion couplings for misaligned shafts in heavy industries such as steel, paper, and conveyors |
Pistons
Engine piston variants for automotive, diesel, and high-load machinery applications with reinforced and coated designs.
Piston specifications covering alloy, coated, reinforced, oil-cooled, and composite piston types with key material ranges.more
| Parameter | Details |
|---|---|
| Piston Types | Aluminium alloy, Alfin or coated, steel strut or reinforced, oil-cooled, and single-piece or composite piston variants |
| Aluminium Alloy Pistons | Widely used in automotive petrol and diesel engines for strong strength-to-weight ratio and good thermal conductivity |
| Alfin / Coated Pistons | Alfin-coated or hard-anodized crown designs for better heat resistance and reduced wear |
| Reinforced Pistons | Steel-reinforced or steel-strut pistons for heavy-load commercial vehicles, tractors, and similar duty cycles |
| Oil-Cooled Pistons | Built with oil-cooling galleries to improve heat dissipation in high-performance and high-load engines |
| Material | Aluminium alloy with cast iron alloy options for diesel applications |
| Diameter Range | 40 mm - 300 mm |
| Height Range | Varies with engine stroke and piston design |
| Alloy Chemistry | Al-Si alloys with Cu/Mg, typically with silicon content above 12% for strength |
| Tensile Strength | About 210 - 275 N/mm² for alloy pistons |
| Hardness | About 70 HRB for aluminium pistons and about 90 HRB for cast iron or ferrous variants |
| Key Features | Coated crowns, oil-cooling galleries, and reinforced strut construction |
Pumps & Pump Parts
Centrifugal, submersible, slurry, and metering pump systems with replacement components for industrial fluid handling.
Pump specifications covering centrifugal, submersible, slurry, metering pumps, and core pump-part components.more
| Pump Segment | Details |
|---|---|
| Centrifugal Pumps | Includes end-suction, horizontal split-casing, vertical turbine, multistage vertical or horizontal, and chemical process pumps; flow rate about 1 - 10,000 m³/hr, head about 5 - 300 m, cast iron, ductile iron, or stainless steel casing, open or enclosed impellers, DN 25 - DN 600 connections, pressure up to about 16 bar, mechanical seal or packing, ISO 5199 / ISO 2858 |
| Submersible Pumps | Industrial water, borewell, sewage, wastewater, and deep-well types; 0.5 - 30+ kW electric motor, 380/415 V at 50 Hz, depth about 10 - 200+ m, flow rate about 5 - 1500 m³/hr, SS304, SS316, or cast iron construction, IP68 cable-entry protection |
| Slurry Pumps | Heavy-duty abrasive-service pumps for mining, dredging, and slurry disposal; horizontal or vertical designs in high-chrome alloy or hard iron, flow rate about 50 - 5000 m³/hr, head about 5 - 80 m, semi-open heavy-duty impellers, solids handling up to about 80 mm+ |
| Metering / Positive Displacement Pumps | Diaphragm metering, gear, peristaltic dosing, and screw or progressive-cavity pumps for accurate flow control; displacement about 0.1 - 500 L/hr, pressure about 10 - 20 bar, stepper, servo, or AC motor drive, PVDF, SS316, or PTFE materials, accuracy about ±1% to ±5% |
| Pump Parts & Components | Pump casings, impellers, shafts, sleeves, seals, packing, wear rings, and diffusers |
Spare Parts for Compressors
Compressor spares covering filtration, valves, cylinder parts, seals, drives, lubrication systems, controls, and air-treatment equipment.
Filtration and separator spares, valve hardware, cylinder assemblies, seals, bearings, lubrication parts, controls, and air-treatment equipment for compressor systems.more
| Spare Group | Details |
|---|---|
| Filtration & Separator Spares | Air filter elements, oil filter elements, coalescing cartridges, oil separators, particulate filters, and desiccant dryer cartridges; filtration ratings commonly 1 µm - 25 µm with premium separators offering oil carry-over of 3 ppm or less |
| Valves & Valve Hardware | Suction valves, inlet valves, discharge valves, valve plates, springs, guides, pilot valves, and unloader parts in stainless steel or high-grade alloys sized to compressor working pressure |
| Cylinder Assemblies | Cylinder blocks, heads, liners, pistons, piston rings, gudgeon pins, and connecting rods in cast iron, ductile iron, forged steel, and related heavy-duty constructions; bore, stroke, clearance, and ring-gap depend on model |
| Gaskets & Seals | Cylinder head gasket kits, base gaskets, oil seals, shaft seals, and mechanical cartridge seals using NBR, Viton (FKM), PTFE, or graphite based on temperature and media compatibility |
| Bearings, Couplings & Drives | Roller and ball bearings, coupling halves, flexible couplings, V-belts, timing belts, and pulleys for main and crank assemblies |
| Oil & Lubrication Spares | Oil pumps, sight glasses, oil coolers, thermostats, oil filters, oil-separator cartridges, and oil sumps; lubricant specification is typically defined by ISO VG or SAE grade together with service interval guidance |
| Electrical / Controls | Electric motors, starters, PLCs, pressure switches, transmitters, sensors, and control panels with motor ratings based on IEC or IS standards and model-specific PLC, soft-start, or VFD requirements |
| Air Treatment Equipment | Air receivers, pressure vessels, dryer cartridges, condensate drains, separators, and related treatment components designed to applicable pressure-vessel rules and outlet dew-point requirements |
Switch Gear
Switchgear products for electrical protection, circuit control, industrial distribution, and panel-based power management.
LV switchgear, control gear, switchgear panels, and MV or HV assemblies with ratings, standards, and typical industrial applications.more
| Category | Types | Typical Application |
|---|---|---|
| LV Switchgear | MCBs, MCCBs, RCCBs, contactors, starters, panels | Industrial, commercial, and residential distribution systems. Low-Voltage Switchgear (LV Switchgear)
|
| Switches & Control Gear | Electrical switches, connectors, terminals, parts | Consumer and industrial circuits. Other switchgear categories
|
| Switchgear Panels | Distribution boards, control panels, MCC | Industrial and power-distribution applications. Switchgear panels & control boards
|
| MV / HV Switchgear | Some components and panel variants | Transmission and distribution. Voltage-category classification
|
Tires
High-performance tires for passenger cars, trucks, buses, off-road vehicles, agricultural equipment, and two- or three-wheelers.
High-performance tires including PCR, TBR, OTR, agricultural, and two- or three-wheeler variants with load, speed, tread, and pressure specifications.more
| Parameter | Details |
|---|---|
| Product Range | Passenger car radial (PCR), truck and bus radial (TBR), off-the-road (OTR), agricultural, and two- or three-wheeler tires |
| Construction | Advanced radial and bias constructions designed for diverse operating conditions |
| Tread & Compound | Optimized tread compounds for traction, wear resistance, and improved fuel efficiency |
| Key Specifications | Load index, speed rating, tread depth, ply rating, section width, aspect ratio, rim compatibility, and pressure capacity |
| Variants | Tubed and tubeless versions with all-season, all-terrain, and specialized application options |
| Performance Benefits | Durability, heat resistance, road stability, and consistent operation across varying terrains and climates |
Transformers & Static Converters
Static converters and electrical transformers for power conversion, voltage regulation, distribution, and industrial electrical systems.
Static converters, transformer categories, rated power ranges, voltage classes, cooling methods, and IEC-based electrical specifications.more
| Product Group | Details |
|---|---|
| Static Converters | Includes inverters, rectifiers, battery chargers, voltage regulators, and stabilizers for AC/DC power conversion and control applications |
| Static Converter Specifications | Typical input 230 V AC or 400 V AC three-phase, controlled DC or AC output depending on converter type, power from small chargers to multi-kW industrial systems, natural or forced-air cooling, SCR/IGBT rectification or PWM inverter control, IEC/EN 61000 EMC reference and IEC 60034 drive-related alignment |
| Transformer Trade Segments | Liquid dielectric transformers up to 650 kVA, above 650 kVA up to 10,000 kVA, above 10,000 kVA, transformers up to 1 kVA, above 16 kVA up to 500 kVA, and above 500 kVA |
| Transformer Categories | Up to 1 kVA for control and instrumentation use, above 1 kVA up to 16 kVA for small distribution or step-down duty, above 16 kVA up to 500 kVA for medium distribution, above 500 kVA for utility and industrial substations |
| General Electrical Parameters | IEC 60076 basis, rated power from 1 kVA small units to 100+ MVA power transformers, 50 Hz or 60 Hz variants, voltage levels up to 33 kV for distribution and 33 kV - 132 kV+ for higher-power systems, ONAN, ONAF, or AN cooling, insulation classes A/B/F/H depending on design |
| Mechanical & Safety Features | Grain-oriented silicon steel cores, oil-filled tanks with breather and conservator or cast-resin dry-type enclosures, Buchholz relay and pressure-relief protection, plus windings, cores, enclosures, and accessories for transformer and converter assemblies |
Solar Products
Solar PV modules, panels, inverters, and charge controllers for renewable-energy systems and export-led power solutions.
PV module specifications plus solar cell, controller, inverter, and panel details covering power, efficiency, voltage, and construction.more
| Solar Product | Details |
|---|---|
| PV Modules | Crystalline silicon photovoltaic modules using monocrystalline, PERC, or TOPCon cells; rated power about 400 - 700+ Wp, efficiency about 20% - 23%, Vmp about 30 - 40 V, Imp about 10 - 18 A, Voc about 40 - 50 V, Isc about 10 - 20 A, anodized aluminium frame, tempered low-iron glass, IP67 junction box, MC4-compatible connectors |
| Solar Cells | Monocrystalline silicon, PERC, and TOPCon cell options with typical efficiency about 22% - 26% and standard wafer formats such as M10 or G12 |
| Charge Controllers | PWM and MPPT charge controllers for 12/24/48 V systems with current ratings from about 10 A to 60 A+ |
| Solar Inverters | Grid-tied, off-grid, and hybrid inverter options with power range about 1 kW - 100 kW+, DC input options such as 12/24/48/380 V, 50 Hz or 60 Hz output frequency, and transformerless or transformer-based topology |
| Monocrystalline PERC Modules | Power range about 400 W - 720 W+, efficiency about 20% - 22%+, M10 or G12 wafer formats, anodized aluminium frame, tempered low-iron solar glass, IP67 junction box, MC4-compatible connector, mechanical load about 5400 Pa snow / 2400 Pa wind |
| TOPCon Modules | Higher-efficiency passivated cell design with typical power output about 450 W - 800 W+, efficiency about 21% - 23%+, and improved low-light and temperature performance |
Lead Acid Accumilators
High-Tolerance Machined Components
Facility-Ready Supply
Useful for both industrial sourcing and global export conversations.
Manufacturing Reliability
Components and assemblies designed for consistent performance in heavy-duty applications.
Energy & Power
Power distribution, control systems, and transmission parts essential to manufacturing and infrastructure.
Project Readiness
Product groupings aligned with buyer planning, quality assurance, and project implementation needs.